Controllers

Introduction

Laravel JSON:API's resource routing assigns routes for a specific resource type to a single controller. As described in the Routing section on controllers, the controller name is either inferred from the resource type, or can be explicitly specified when registering resource routes.

Generating Controllers

JSON:API controllers should be generated using the jsonapi:controller command, instead of using Laravel's make:controller command. This is so that we can generate a controller that has all the actions required for JSON:API routing. For example:

bash

php artisan jsonapi:controller Api/V1/PostController

This will generate a controller at app/Http/Controllers/Api/V1/PostController.php. This means the controller's fully-qualified class name will be App\Http\Controllers\Api\V1\PostController.

The generated controller will look like this:

php

namespace App\Http\Controllers\Api\V1;

use App\Http\Controllers\Controller;
use LaravelJsonApi\Laravel\Http\Controllers\Actions;

class PostController extends Controller
{

    use Actions\FetchMany;
    use Actions\FetchOne;
    use Actions\Store;
    use Actions\Update;
    use Actions\Destroy;
    use Actions\FetchRelated;
    use Actions\FetchRelationship;
    use Actions\UpdateRelationship;
    use Actions\AttachRelationship;
    use Actions\DetachRelationship;

}

As you can see, the methods needed for all the JSON:API route actions are added via traits. Our action traits handle requests and generate responses that conform with the JSON:API specification. They also allow you to specify controller hooks that are called during the action methods.

These actions and hooks are described later in this chapter. However, it is important to explain at this point that we use traits so that it is easier for you to implement custom actions if you need to deviate from our default implementation.

For example, say we only needed a custom implementation for the show route. We would remove the Actions\FetchOne trait, but leave all the other traits. Then we would just need to write our own show method on the controller.

See the next chapter for a complete guide to writing your own controller actions.

JSON:API Controller

If you have a resource type that does not need to use any controller hooks, and does not need to override any of our default action implementations, you can use our JsonApiController. This removes the need for you to generate a controller for a resource type. This can be registered as follows:

php

use LaravelJsonApi\Laravel\Http\Controllers\JsonApiController;

JsonApiRoute::server('v1')
    ->prefix('v1')
    ->resources(function ($server) {
        $server->resource('posts', JsonApiController::class);
    });

If you are using controller namespacing, you will need to fully-qualify the generic controller when registering it. For example:

php

use LaravelJsonApi\Laravel\Http\Controllers\JsonApiController;

JsonApiRoute::server('v1')
    ->prefix('v1')
    ->namespace('Api\V1')
    ->resources(function ($server) {
        $server->resource('posts', '\\' . JsonApiController::class);
    });

Controller Hooks

Each of our default controller actions will invoke methods on the controller if they are implemented. For example, the store action will invoke the saving, creating, created and saved hooks, if they are implemented on the controller.

These hooks allow you to easily implement application specific actions, such as firing events or dispatching jobs. They also allow you to return customised responses. If you return a response from any hook, the controller action will stop executing and immediately return the response.

Resource Hooks

Fetch-Many aka Index

Our LaravelJsonApi\Laravel\Http\Controllers\Actions\FetchMany trait implements the index controller action. This fetches a list of resources.

This action has two hooks: searching and searched.

The searching hook will be called with the validated query parameters for the resource collection. This will either be an instance of LaravelJsonApi\Laravel\Http\Requests\AnonymousCollectionQuery, or the specific class if you have generated one for your resource, for example:

php

use App\JsonApi\V1\Posts\PostCollectionQuery;

public function searching(PostCollectionQuery $query): void
{
  // do something...
}

TIP

Both the AnonymousCollectionQuery and PostCollectionQuery extend Laravel's FormRequest class. More details are available in the Requests chapters.

The searched hook will be called once models have been retrieved from the database. The first argument will be the result of the query, and the second will be the query request class. For example:

php

use App\JsonApi\V1\Posts\PostCollectionQuery;

public function searched($data, PostCollectionQuery $query): void
{
  // e.g. dispatch a job.
}

The searched hook can return a response to override the default response created by the FetchMany trait.

WARNING

The $data argument provided to the searched hook could be a mixture of types. For example, it could be an Eloquent collection or a JSON:API page object - or even a model or null if a singular filter was used. It is therefore likely you will need to check the type before taking action within your searched hook.

Fetch-One aka Show

Our LaravelJsonApi\Laravel\Http\Controllers\Actions\FetchOne trait implements the show controller action. This fetches a specified resource.

This action has two hooks: reading and read.

The reading hook will be called with the validated query parameters for the resource. This will either be an instance of LaravelJsonApi\Laravel\Http\Requests\AnonymousQuery, or the specific class if you have generated one for your resource, for example:

php

use App\JsonApi\V1\Posts\PostQuery;

public function reading(PostQuery $query): void
{
  // do something...
}

TIP

Both the AnonymousQuery and PostQuery classes extend Laravel's FormRequest class. More details are available in the Requests chapters.

The read hook will be called once model has been retrieved from the database. The first argument will be the model, and the second will be the query request class. For example:

php

use App\JsonApi\V1\Posts\PostQuery;
use App\Models\Post;

public function read(?Post $post, PostCollectionQuery $query): void
{
  // e.g. dispatch a job.
}

The read hook can return a response to override the default response created by the FetchOne trait.

WARNING

The $model argument provided to the read hook is nullable for a reason. If the client provides filter query parameters, the model may not match the filters and therefore the result of retrieving it from the database will be null.

Whatever you do in the read hook, you should ensure that it handles a null value safely.

Store

Our LaravelJsonApi\Laravel\Http\Controllers\Actions\Store trait implements the store controller action. This creates a new resource.

This action has four hooks: saving, creating, created and saved. Note that the saving and saved hooks are also called by the Update action.

The saving hook will be called with three arguments:

null to indicate that this is a create, not an update.
The JSON:API request class for the resource, which will have validated the JSON document in the request, e.g. PostRequest.
The validated query parameters - either an instance of LaravelJsonApi\Laravel\Http\Requests\AnonymousQuery, or the specific class if you have generated one for your resource (e.g. PostQuery).

For example:

php

use App\JsonApi\V1\Posts\PostQuery;
use App\JsonApi\V1\Posts\PostRequest;
use App\Models\Post;

public function saving(?Post $post, PostRequest $request, PostQuery $query): void
{
  // do something on creating and updating...
}

The creating hook will only receive the request classes, for example:

php

use App\JsonApi\V1\Posts\PostQuery;
use App\JsonApi\V1\Posts\PostRequest;

public function creating(PostRequest $request, PostQuery $query): void
{
  // do something only on creating...
}

TIP

All the PostRequest, AnonymousQuery and PostQuery classes extend Laravel's FormRequest class. More details are available in the Requests chapters.

The saved and created hooks will be called once model has been created and stored in the database. They both receive three arguments:

The model that was created.
The JSON:API request class for the resource.
The validated query parameters.

For example:

php

use App\JsonApi\V1\Posts\PostQuery;
use App\JsonApi\V1\Posts\PostRequest;
use App\Models\Post;

public function saved(Post $post, PostRequest $request, PostQuery $query): void
{
  // do something on created and updated...
}

public function created(Post $post, PostRequest $request, PostQuery $query): void
{
  // do something only on created...
}

Both the saved and created hooks can return a response to override the default response created by the Store trait. Note that if the saved hook returns a response, the created hook will not be invoked.

Update

Our LaravelJsonApi\Laravel\Http\Controllers\Actions\Update trait implements the update controller action. This updates an existing resource.

This action has four hooks: saving, updating, updated and saved. Note that the saving and saved hooks are also called by the Store action.

The saving and updating hooks will be called with three arguments:

The model that is being updated.
The JSON:API request class for the resource, which will have validated the JSON document in the request, e.g. PostRequest.
The validated query parameters - either an instance of LaravelJsonApi\Laravel\Http\Requests\AnonymousQuery, or the specific class if you have generated one for your resource (e.g. PostQuery).

For example:

php

use App\JsonApi\V1\Posts\PostQuery;
use App\JsonApi\V1\Posts\PostRequest;
use App\Models\Post;

public function saving(?Post $post, PostRequest $request, PostQuery $query): void
{
  // do something on creating and updating...
}

public function updating(Post $post, PostRequest $request, PostQuery $query): void
{
  // do something only on updating...
}

TIP

All the PostRequest, AnonymousQuery and PostQuery classes extend Laravel's FormRequest class. More details are available in the Requests chapters.

The saved and updated hooks will be called once model has been updated and stored in the database. They both receive the same three arguments.

For example:

php

use App\JsonApi\V1\Posts\PostQuery;
use App\JsonApi\V1\Posts\PostRequest;
use App\Models\Post;

public function saved(Post $post, PostRequest $request, PostQuery $query): void
{
  // do something on created and updated...
}

public function updated(Post $post, PostRequest $request, PostQuery $query): void
{
  // do something only on created...
}

Both the saved and updated hooks can return a response to override the default response created by the Update trait. Note that if the saved hook returns a response, the updated hook will not be invoked.

Destroy

Our LaravelJsonApi\Laravel\Http\Controllers\Actions\Destroy trait implements the destroy controller action. This deletes an existing resource.

This action has two hooks: deleting and deleted. These hooks will be called with two arguments:

The model that is being deleted.
The JSON:API request class for the resource, which will validated the delete request, e.g. PostRequest.

For example:

php

use App\JsonApi\V1\Posts\PostRequest;
use App\Models\Post;

public function deleting(Post $post, PostRequest $request): void
{
  // do something...
}

public function deleted(Post $post, PostRequest $request): void
{
  // do something...
}

TIP

The PostRequest class extends from Laravel's FormRequest class. More details are available in the Requests chapters.

The default response returned by the Destroy trait is a 204 No Content response. The deleted hook can return a response to override this default response.

Relationship Hooks

Concept

An important concept to highlight with relationship actions is that the JSON:API query parameters relate to the resource type returned by the relationship, not the resource type on which the relationship exists.

The type of query parameters class is also determined by whether the relation is a to-one or to-many relationship.

For to-one, the query class will be for a zero-to-one response. For example, if we have an author relationship on a posts resource, that returns zero-to-one users resources. The query class will either be the UserQuery class if it exists, or our LaravelJsonApi\Laravel\Http\Requests\AnonymousQuery class.

For to-many, the query class will be for a zero-to-many response. For example, if we have a tags relationship on a posts resource, that returns zero-to-many tags resource. The query class will either be the TagCollectionQuery class if it exists, or our LaravelJsonApi\Laravel\Http\Requests\AnonymousCollectionQuery class.

Our LaravelJsonApi\Laravel\Http\Controllers\Actions\FetchRelated trait implements the showRelated controller action. This fetches the related resource(s) for a relationship.

This action has two hooks: readingRelated{Field} and readRelated{Field}. The field is the field-name for the relationship.

The readingRelated{Field} hook receives two arguments:

The model on which the relationship exists.
The query class for the resource type returned by the relationship.

For example if a posts resource has a to-one author relationship, and a to-many tags relationship, the following readingRelated hooks can exist:

php

use App\JsonApi\V1\Tags\TagCollectionQuery;
use App\JsonApi\V1\Users\UserQuery;
use App\Models\Post;

public function readingRelatedAuthor(Post $post, UserQuery $query): void
{
  // do something...
}

public function readingRelatedTags(Post $post, TagCollectionQuery $query): void
{
  // do something...
}

TIP

Both the AnonymousQuery, AnonymousCollectionQuery and specific classes (e.g. UserQuery and TagCollectionQuery) extend Laravel's FormRequest class. More details are available in the Requests chapters.

The readRelated{Field} hook recieves three arguments:

The model on which the relationship exists.
The data returned by the relationship. For a to-one relation, this will be the related model or null. For a to-many, this will be of mixed type depending on the request filter and page parameters.
The query class for the resource type returned by the relationship.

Using our example of an author and a tags relation on a posts resource:

php

use App\JsonApi\V1\Tags\TagCollectionQuery;
use App\JsonApi\V1\Users\UserQuery;
use App\Models\Post;
use App\Models\User;

public function readRelatedAuthor(Post $post, ?User $user, UserQuery $query): void
{
  // do something...
}

public function readRelatedTags(Post $post, $data, TagCollectionQuery $query): void
{
  // do something...
}

The readRelated{Field} hook can return a response to override the default response created by the FetchRelationship trait.

WARNING

The $user argument provided to the readRelatedAuthor hook is nullable for a reason. If the client provides filter query parameters, the model may not match the filters and therefore the result of retrieving the relation it from the database will be null.

For to-many relations, the $data argument provided to the readRelatedTags hook will be of mixed type. It could be an Eloquent collection or a JSON:API page object - or even a model or null if a singular filter was used. You will need to check the type before taking action with it.

Fetch-Relationship aka Show-Relationship

Our LaravelJsonApi\Laravel\Http\Controllers\Actions\FetchRelationship trait implements the showRelationship controller action. This fetches the related resource(s) for a relationship and returns their resource identifiers.

This action has two hooks: reading{Field} and read{Field}. The field is the field-name for the relationship.

The reading{Field} hook receives two arguments:

The model on which the relationship exists.
The query class for the resource type returned by the relationship.

For example if a posts resource has a to-one author relationship, and a to-many tags relationship, the following hooks can exist:

php

use App\JsonApi\V1\Tags\TagCollectionQuery;
use App\JsonApi\V1\Users\UserQuery;
use App\Models\Post;

public function readingAuthor(Post $post, UserQuery $query): void
{
  // do something...
}

public function readingTags(Post $post, TagCollectionQuery $query): void
{
  // do something...
}

TIP

The read{Field} hook receives three arguments:

The model on which the relationship exists.
The data returned by the relationship. For a to-one relation, this will be the related model or null. For a to-many, this will be of mixed type depending on the request filter and page parameters.
The query class for the resource type returned by the relationship.

Using our example of an author and a tags relation on a posts resource:

php

use App\JsonApi\V1\Tags\TagCollectionQuery;
use App\JsonApi\V1\Users\UserQuery;
use App\Models\Post;
use App\Models\User;

public function readAuthorRelationship(Post $post, ?User $user, UserQuery $query): void
{
  // do something...
}

public function readTagsRelationship(Post $post, $data, TagCollectionQuery $query): void
{
  // do something...
}

The read{Field} hook can return a response to override the default response created by the FetchRelationship trait.

WARNING

The $user argument provided to the readAuthor hook is nullable for a reason. If the client provides filter query parameters, the model may not match the filters and therefore the result of retrieving the relation it from the database will be null.

For to-many relations, the $data argument provided to the readTags hook will be of mixed type. It could be an Eloquent collection or a JSON:API page object - or even a model or null if a singular filter was used. You will need to check the type before taking action with it.

Update-Relationship

Our LaravelJsonApi\Laravel\Http\Controllers\Actions\UpdateRelationship trait implements the updateRelationship controller action. This completely replaces the contents of a relationship, and then returns the resource identifiers of the new relationship value.

This action has two hooks: updating{Field} and updated{Field}. The field is the field-name for the relationship.

The updating{Field} hook receives three arguments:

The model on which the relationship exists.
The JSON:API request class for the resource that is having its relationship updated, e.g. PostRequest when updating a posts author relationship.
The query class for the resource type returned by the relationship.

For example if a posts resource has a to-one author relationship, and a to-many tags relationship, the following hooks can exist:

php

use App\JsonApi\V1\Posts\PostRequest;
use App\JsonApi\V1\Tags\TagCollectionQuery;
use App\JsonApi\V1\Users\UserQuery;
use App\Models\Post;

public function updatingAuthor(
  Post $post,
  PostRequest $request,
  UserQuery $query
): void
{
  // do something...
  // to access the author use:
  /** @var \App\Models\User|null $author */
  $author = $request->toOne();
}

public function updatingTags(
  Post $post,
  PostRequest $request,
  TagCollectionQuery $query
): void
{
  // do something...
  // to access the tags, use:
  /** @var \Illuminate\Support\Collection $tags */
  $tags = $request->toMany();
}

TIP

The updated{Field} hook receives four arguments:

The model on which the relationship exists.
The data that replaced the relationship. For a to-one relation, this will be the related model or null. For a to-many, this will typically be an Eloquent collection.
The JSON:API request class for the resource that had its relationship updated.
The query class for the resource type returned by the relationship.

Using our example of an author and a tags relation on a posts resource:

php

use App\JsonApi\V1\Posts\PostRequest;
use App\JsonApi\V1\Tags\TagCollectionQuery;
use App\JsonApi\V1\Users\UserQuery;
use App\Models\Post;
use App\Models\User;

public function updatedAuthor(
  Post $post,
  ?User $user,
  PostRequest $request,
  UserQuery $query
): void
{
  // do something...
  // to access the author use:
  /** @var \App\Models\User|null $author */
  $author = $request->toOne();
}

public function updatedTags(
  Post $post,
  $tags,
  PostRequest $request,
  TagCollectionQuery $query
): void
{
  // do something...
  // to access the tags, use:
  /** @var \Illuminate\Support\Collection $tags */
  $tags = $request->toMany();
}

The updated{Field} hook can return a response to override the default response created by the UpdateRelationship trait.

Attach-Relationship

Our LaravelJsonApi\Laravel\Http\Controllers\Actions\AttachRelationship trait implements the attachRelationship controller action. This action attaches models to a to-many relationship.

This action has two hooks: attaching{Field} and attached{Field}. The field is the field-name for the relationship.

The attaching{Field} hook receives three arguments:

The model on which the relationship exists.
The JSON:API request class for the resource that is having its relationship updated, e.g. PostRequest when updating a posts tags relationship.
The query class for the resource type returned by the relationship.

For example if a posts resource has to-many tags relationship, the attachingTags hook can exist:

php

use App\JsonApi\V1\Posts\PostRequest;
use App\JsonApi\V1\Tags\TagCollectionQuery;
use App\Models\Post;

public function attachingTags(
  Post $post,
  PostRequest $request,
  TagCollectionQuery $query
): void
{
  // do something...
  // to access the tags, use:
  /** @var \Illuminate\Support\Collection $tags */
  $tags = $request->toMany();
}

TIP

Both the AnonymousCollectionQuery and specific classes (e.g. TagCollectionQuery) extend Laravel's FormRequest class. More details are available in the Requests chapters.

The attached{Field} hook receives four arguments:

The model on which the relationship exists.
The data that was attached to the relationship, as an Eloquent collection.
The JSON:API request class for the resource that had its relationship updated.
The query class for the resource type returned by the relationship.

Using our example of a tags relation on a posts resource:

php

use App\JsonApi\V1\Posts\PostRequest;
use App\JsonApi\V1\Tags\TagCollectionQuery;
use App\Models\Post;

public function attachedTags(
  Post $post,
  $tags,
  PostRequest $request,
  TagCollectionQuery $query
): void
{
  // do something...
  // to access the tags, use:
  /** @var \Illuminate\Support\Collection $tags */
  $tags = $request->toMany();
}

The attached{Field} hook can return a response to override the default 204 No Content created by the AttachRelationship trait.

Detach-Relationship

Our LaravelJsonApi\Laravel\Http\Controllers\Actions\DetachRelationship trait implements the detachRelationship controller action. This action detaches models from a to-many relationship.

This action has two hooks: detaching{Field} and detached{Field}. The field is the field-name for the relationship.

The detaching{Field} hook receives three arguments:

The model on which the relationship exists.
The JSON:API request class for the resource that is having its relationship updated, e.g. PostRequest when updating a posts tags relationship.
The query class for the resource type returned by the relationship.

For example if a posts resource has to-many tags relationship, the detachingTags hook can exist:

php

use App\JsonApi\V1\Posts\PostRequest;
use App\JsonApi\V1\Tags\TagCollectionQuery;
use App\Models\Post;

public function detachingTags(
  Post $post,
  PostRequest $request,
  TagCollectionQuery $query
): void
{
  // do something...
  // to access the tags, use:
  /** @var \Illuminate\Support\Collection $tags */
  $tags = $request->toMany();
}

TIP

Both the AnonymousCollectionQuery and specific classes (e.g. TagCollectionQuery) extend Laravel's FormRequest class. More details are available in the Requests chapters.

The detached{Field} hook receives four arguments:

The model on which the relationship exists.
The data that was detached from the relationship, as an Eloquent collection.
The JSON:API request class for the resource that had its relationship updated.
The query class for the resource type returned by the relationship.

Using our example of a tags relation on a posts resource:

php

use App\JsonApi\V1\Posts\PostRequest;
use App\JsonApi\V1\Tags\TagCollectionQuery;
use App\Models\Post;

public function detachedTags(
  Post $post,
  $tags,
  PostRequest $request,
  TagCollectionQuery $query
): void
{
  // do something...
  // to access the tags, use:
  /** @var \Illuminate\Support\Collection $tags */
  $tags = $request->toMany();
}

The detached{Field} hook can return a response to override the default 204 No Content created by the DetachRelationship trait.

Controllers ​

Introduction ​

Generating Controllers ​

JSON:API Controller ​

Controller Hooks ​

Resource Hooks ​

Fetch-Many aka Index ​

Fetch-One aka Show ​

Store ​

Update ​

Destroy ​

Relationship Hooks ​

Concept ​

Fetch-Related aka Show-Related ​

Fetch-Relationship aka Show-Relationship ​

Update-Relationship ​

Attach-Relationship ​

Detach-Relationship ​

Controllers

Introduction

Generating Controllers

JSON:API Controller

Controller Hooks

Resource Hooks

Fetch-Many aka Index

Fetch-One aka Show

Store

Update

Destroy

Relationship Hooks

Concept

Fetch-Related aka Show-Related

Fetch-Relationship aka Show-Relationship

Update-Relationship

Attach-Relationship

Detach-Relationship